Home Electrical Inspection in Portland, Oregon
A home inspector looks at everything in the house for a few minutes each. A home electrical inspection is a licensed electrician spending that whole visit on one system: the one that starts fires when it fails. You get a written report that separates what is unsafe from what is merely old.
- OR CCB #195783 · ELEC C818
- Licensed, bonded & insured
- 24/7 emergency response
- Generac Authorized Dealer
A home electrical inspection is a licensed electrician's examination of your panel, breakers, wiring connections, grounding, GFCI and AFCI protection, and smoke and CO alarms, followed by a written report. Paramount Electric Co. performs them for Portland-area buyers, sellers, and owners of older homes, and quotes any repairs separately.
What a home electrical inspection covers
We open the main panel and any subpanels and look at the breakers, bus, terminations, and wire sizing against each breaker. We check connections for heat damage and looseness, verify grounding and bonding at the service, test GFCI and AFCI protection where it is installed and note where it is required but missing, and test smoke and CO alarms. Around the house we sample outlets for correct wiring and grounding, look at visible wiring in the attic, crawlspace, garage, and basement, and check exterior equipment and the service entrance.
What we look for in older Portland homes
Portland's housing stock runs back more than a century, and each era left its own problems. Knob-and-tube wiring buried under insulation. Two-prong ungrounded circuits with three-prong outlets installed on them. Zinsco and Federal Pacific panels whose breakers may not trip. Aluminum branch wiring from the 1960s and 70s with failing connections. Decades of handyman additions, open splices, and overloaded circuits. An inspection tells you which of these your home has and how urgent each one is.
The written report
You receive a written report after the visit. Findings are grouped by priority: hazards that should be corrected now, code and safety deficiencies worth planning for, and observations that are simply good to know. Photos are included for the items that matter. If you want repairs quoted, we price them as a separate, fixed scope. There is no obligation to use us for the work, and the report is yours either way.
How this differs from a general home inspection
A general home inspector is a generalist working to a checklist across roof, structure, plumbing, HVAC, and electrical in a single visit, and typically does not remove more than the panel cover. That is the right tool for a whole-house overview. When the general report flags the electrical system, or the house is old enough that it should, a licensed electrician's inspection goes further: terminations, wire sizing, grounding, load, and the judgment to say what a finding will take to fix.
How this differs from a permit inspection
The city or county inspector who signs off a permit looks only at the new work covered by that permit. They are not evaluating the rest of the house. A home electrical inspection is the opposite: no permit, no new work, just an assessment of the existing system as it stands today.
When to schedule one
Before you close on a house, especially one built before the 1980s. Before listing a home you suspect has electrical issues. Before a remodel, heat pump, or EV charger, so the design starts from real numbers. After a flood, fire, or lightning event. And any time the house is telling you something: breakers tripping, lights dimming when appliances start, warm outlets, or a smell you cannot place.
A yearly inspection as routine maintenance
Electrical systems age quietly. Connections loosen with years of heating and cooling, protective devices wear out, and loads creep up as households add equipment. A yearly look at the panel, connections, protection devices, and alarms catches the slow problems while they are still inexpensive. Ask us about setting up an annual visit.
Who We Do This Work For
Our Process, Step by Step
- ScheduleTell us the address, the age of the home, and why you want it inspected. Real-estate deadlines get priority in scheduling where we can.
- InspectA licensed electrician works through the panel, protection devices, grounding, accessible wiring, and alarms.
- Walk throughBefore we leave, we show you the significant findings in person.
- ReportYou receive the written report with prioritized findings and photos.
- Quote (optional)If you want repairs priced, we send a fixed quote for the scope you choose.
Code & permits
An inspection itself needs no permit. Homes are generally not required to be brought up to current code just because the code changed, so many findings in an older house are legal as built; we distinguish those from true hazards and from defects that were never compliant. Any repair that requires a permit is permitted and inspected through your city or county building department under the Oregon Electrical Specialty Code.
Who issues electrical permits in Oregon →A Yearly Safety Inspection and Member Pricing
Plans start at $19/month with an annual electrical safety inspection and a labor discount on service and repairs. Ridge and Summit add yearly standby generator maintenance.
Home Electrical Inspection — Questions We Hear
What is a home electrical inspection?
Is this the same as the inspection for a permit?
Do I need one if I already had a general home inspection?
Will my old house fail?
Do you fix what you find?
Can you inspect before a home purchase closes?
Home Electrical Inspection Work We Can Show You
Field Notes on Home Electrical Inspection
Home Electrical Inspection across the Portland metro
Working with a contractor for the first time? Start with Paramount Electric Co. — or see how we work with facility & property managers and general contractors.
Ready to talk about home electrical inspection?
Request service online or call — estimates come back fast.
