November 3, 2026 · 6 min read

Who Issues Your Electrical Permit in Oregon? Counties, Cities, and How It Actually Works

Every wired circuit in Oregon answers to the same rulebook (the Oregon Electrical Specialty Code). Who stamps the permit, and who shows up with the clipboard, depends on the address. Cross a county line. Sometimes just a city limit. Different counter. We file out of Clackamas, and we file wherever else in the state the job actually sits.

Wood roof trusses and wall framing of a house under construction against a blue skyGuides

One code, many counters

The Building Codes Division writes the statewide electrical rules. Something like 130 cities and counties run their own programs under that umbrella. If they do, their inspectors show up. If they don't, BCD is the counter. A few corners of Oregon never had a local program. The state is the only office.

Same panel change, different desk. Inside Portland, the city's permitting bureau. Unincorporated Clackamas, the county. A small city might be city hall or the county, and you find out by the address, not by the mailing label. Most of the filing we do now is Oregon ePermitting. Same login, different jurisdiction on the form.

The metro, county by county

We sit in Clackamas, so that county's program is the one we know by the inspector's first name. Unincorporated ground and a lot of its cities. Paperwork right, inspections often the same week. West side is Washington County's own shop. A lot of Multnomah addresses go through Portland. Gresham, Salem, Eugene run themselves. Each one wants the load calc formatted a little differently, and they will send it back if you guess.

  • Clackamas County: our home jurisdiction, unincorporated areas and many cities
  • Portland: city permitting bureau for addresses inside city limits
  • Washington County: county program for the west metro
  • Salem, Eugene, Gresham and other cities: their own city programs
  • Rural counties: often served directly by the state BCD

Why the contractor should pull the permit

The person who does the work should pull the permit. That's who the inspector yells at. When we pull it, corrections land on us, we book the reinspect, and you get a signed record. A bid that asks you to pull your own permit is telling you something about their license. Look it up before they open the panel.

The paper is for the insurer, the buyer, and the fire marshal. Unpermitted work feels cheap until one of those three shows up.

What the process looks like on a real job

Small service jobs: we file, often the day we schedule, and call inspection when the work is actually ready. Construction and tenant work rides with the building permit. Plan review if they want it. Rough before cover. Final at the end. Design-build means we also shove the engineering submittals through before they issue, not after they reject the set.

Years in these offices means we know who turns a simple permit around in a day and who wants plan review on anything over a certain service. That's the schedule risk, and it belongs in the bid.

Look the license up. It's public.

An electrical permit in Portland is only as good as the license on the application. Same everywhere else in the state. Oregon electrical license lookup is not a favor. The Construction Contractors Board has the CCB number. The Building Codes Division has the electrical contractor license. Ours are CCB 195783 and C818. If a bid asks you to pull your own permit, look them up before you sign anything. That request is usually the tell.

Oregon electrical license requirements for the company doing the work are statewide. A city can run its own counter (Portland does, a lot of small towns don't). A city does not hand out a separate electrical contractor license. 'Oregon state electrical license' and 'electrical license lookup Oregon' both land you in those two databases. That's the check. A magnet on a truck door is not.

Common questions

Do I need a permit to replace an electrical panel in Oregon?
Yes. Panel and service changes require an electrical permit and inspection everywhere in Oregon. The permit is filed with whichever jurisdiction serves the address (city, county, or the state BCD) and we handle that as part of the job.
Who pulls the electrical permit, me or my contractor?
Your licensed electrical contractor should pull it, because the permit holder is who the inspector holds responsible for the work. When we pull the permit, corrections, scheduling, and final sign-off are our responsibility, and you receive the finished record.
How long does an electrical permit take in the Portland metro?
Simple electrical permits are often issued same-day through Oregon ePermitting. Projects that need plan review (larger services, new construction, major tenant improvements) vary by jurisdiction and scope, and we build that review time into the project schedule.
Does my city or county handle my permit, or the state?
It depends on the address. Most metro jurisdictions run their own programs. Some smaller cities are covered by their county, and some rural areas are served directly by the state Building Codes Division. BCD's site has a jurisdiction lookup. Or just ask us. We file in these offices every week.
You're in Clackamas. Can you pull permits outside Clackamas County?
Yes. An Oregon electrical contractor license is statewide. We hold permits in Clackamas, Multnomah, Washington, Marion, and other Oregon counties. Same crew, different counter.
Written by the licensed electricians at Paramount Electric Co. (OR CCB #195783 · ELEC C818) and reviewed by Maurice Greven, Project Manager / Supervisor, who holds Oregon supervising electrician license #4828S. Have a job this applies to? Call (971) 471-7897 or request service online.

Permits handled, start to sign-off

Tell us about the project and we'll handle the permit, the inspections, and the paperwork: or call (971) 471-7897.