Commercial Electrical Safety Inspections & Testing in Portland, Oregon
Electrical failures rarely come without warning; the warning is just invisible. Our inspection and testing services put numbers on the condition of your gear: infrared scans that show heat before it becomes a fault, arc flash labeling that protects your people, and written reports your insurer, facilities team, and safety officer can act on.
- OR CCB #195783 · ELEC C818
- Licensed, bonded & insured
- 24/7 emergency response
- Generac Authorized Dealer
Paramount Electric Co. inspects and tests commercial electrical systems across the Portland metro: infrared thermal scans of panels and switchgear under load, connection and torque checks, emergency and exit lighting testing, and code and insurance inspections. Every visit ends with a written report with photos and a priced list of corrections.
Infrared thermal imaging
Thermal scans of panels, switchgear, transformers, disconnects, and motor control centers under load, identifying loose connections, overloaded conductors, and failing breakers. Every finding is photographed, rated by severity, and paired with a corrective recommendation and price.
Arc flash and NFPA 70E
Arc flash hazard labeling and the data collection behind it, coordinated with licensed engineers for the incident-energy study, plus equipment labeling, PPE guidance, and lockout-tagout support that keeps your maintenance staff compliant with NFPA 70E.
Compliance and preventive programs
Code-compliance and insurance-carrier inspections, emergency and exit lighting testing, grounding and bonding verification, torque and connection checks, and NFPA 70B-based preventive maintenance programs with an annual or semi-annual cadence and a written condition report each cycle.
What does a commercial electrical safety inspection find?
Mostly heat and neglect. The common findings are loose or deteriorated connections running hot, breakers and conductors carrying more than they should, panels with missing covers or blocked working space, circuits that no longer match the panel schedule, damaged cords and raceways, and emergency lights that won't hold for the required duration. None of these announce themselves, which is why they are found by inspection instead of by failure.
Why infrared scans have to be done under load
A thermal camera sees temperature differences, and a loose connection only heats up when current is flowing through it. We schedule scans when the building is operating normally, open the equipment safely, and capture a thermal and a visible-light image of each finding. The report shows where the problem is and how it compares with the same component on the other phases.
Emergency and exit lighting testing
Emergency and exit lighting has to work when normal power fails, and fire and building codes call for periodic testing with written records. We run the functional and duration tests, replace failed batteries, lamps, and fixtures, and leave a log the building can show an inspector. This is available as a stand-alone service or as part of a maintenance program.
From report to repair
An inspection is only useful if the findings get fixed. Each item in our report comes with a recommended correction and a price, so you can approve the urgent items immediately and budget the rest. Because the inspection crew are licensed electricians, the same people make the repairs — there's no second contractor to brief.
Recurring programs
A single inspection gives you a snapshot. An annual or semi-annual program built on NFPA 70B gives you a trend: you can see which gear is deteriorating and plan replacement before it fails. Program customers get a report each cycle and a consistent point of contact.
Who We Do This Work For
Our Process, Step by Step
- ScopeWe agree on what gets inspected: which panels and gear, which tests, and when the building is under normal load.
- Inspect & testInfrared scans, visual inspection, connection checks, and lighting tests, with photos of every finding.
- ReportA written report: findings ranked by severity, thermal images, and a recommended correction for each.
- QuoteA priced corrective scope you can approve item by item.
- Correct & re-testThe same crew makes the repairs and verifies the result.
Code & permits
NFPA 70B is the standard for electrical equipment maintenance, NFPA 70E covers electrical safety in the workplace, and emergency and exit lighting testing is set by the fire and life-safety codes adopted in Oregon. Our inspections are a contractor's condition assessment; they don't replace the inspections performed by the building department on permitted work.
Who issues electrical permits in Oregon →Multi-site & facility service
For portfolios and multi-site operators we run the same inspection scope at every location and deliver reports in a consistent format, so conditions can be compared building to building.
Electrical service for facility managers →Electrical Safety Inspections & Testing — Questions We Hear
How often should commercial electrical gear be scanned?
Do you perform the arc flash study yourselves?
What do we get after an inspection?
Who performs infrared electrical inspections in Portland, Oregon?
Does the power have to be shut off for an inspection?
How often does emergency and exit lighting need to be tested?
Will my insurance carrier accept your report?
Electrical Safety Inspections & Testing Work We Can Show You
Field Notes on Electrical Safety Inspections & Testing
Electrical Safety Inspections & Testing across the Portland metro
Working with a contractor for the first time? Start with Paramount Electric Co. — or see how we work with facility & property managers and general contractors.
Put your facility on a schedule
Book a facility assessment: a walk-through, an infrared scan, and a written report with findings and pricing.


