Oregon

Commercial Electrical Repair & Service

When something electrical fails in a commercial building, the clock is running on lost revenue — a dark sales floor, a down cooler, a kitchen that can't open. Our service electricians diagnose the actual fault, carry the parts and test equipment to fix it the first time, and answer the phone after hours.

  • OR CCB #195783 · ELEC C818
  • Licensed, bonded & insured
  • 24/7 emergency response
  • Generac Authorized Dealer
The short answer

Paramount Electric Co. repairs commercial electrical systems across the Portland metro: tripping breakers, damaged panelboards, dead circuits, equipment and refrigeration feeds, and interior and exterior lighting. Our on-call line is answered 24/7 for emergencies at (971) 471-7897, and repairs beyond the first diagnosis are quoted in writing before the work proceeds.

Diagnosed to the root cause, not the symptom

A tripping breaker is a symptom. The cause might be a failing motor, a loose termination cooking itself, or a circuit that's been overloaded since the last tenant. We trace faults with proper test equipment and fix what's actually wrong — because the repair that comes back isn't a repair, it's a rental.

Panelboard, breaker & switchgear repair

Loose connections generate heat, heat becomes arcing, and arcing destroys breakers and bus work. We repair and replace damaged breakers, bus bars, lugs, and feeders in live buildings — including planned after-hours shutdowns so the work happens while your doors are closed, not while customers are in the aisles.

Equipment & refrigeration circuits

Walk-in coolers, rooftop compressors and HVAC units, kitchen equipment, car wash motors, signage, gate operators — the circuits that make a commercial property earn its keep. When one goes down, we restore it fast and verify the rest of the feed is sound before we leave.

One-off repairs or a standing arrangement

Plenty of our repair calls are first calls — a property manager or store manager who found us when something broke. Many become standing clients: after the repair, we can put the building on a maintenance schedule so the next failure gets caught as a warm spot on a thermal scan instead of a burnt bus bar at 9 pm.

What commercial electrical problems do you repair?

Breakers that trip or will not reset, panelboards with heat damage, dead receptacles and circuits, flickering or failed lighting, parking lot and sign lighting, rooftop unit and compressor feeds, walk-in cooler circuits, kitchen equipment, motors and gate operators, and the corrections that follow a fire-marshal, insurance, or code inspection.

A real example: emergency panelboard repair

At a Walgreens in Newberg, a failed breaker had damaged the panelboard's bus. We made the equipment safe, sourced the replacement components, and completed the repair so the store could keep operating. The case study, with photos of the damage and the repair, is linked below. It is a fair picture of how these calls go: stabilize first, then a planned permanent fix.

How repair work is priced

Diagnosis comes first, because nobody can price a repair honestly before the cause is known. Once it is, the permanent repair is quoted as a fixed price for a defined scope and approved before we proceed. If opening the equipment reveals more damage than expected, we show you and revise the quote by written change order rather than proceeding on assumption.

Who it's for

Who We Do This Work For

Store & restaurant managersSomething is down right now and the business needs it back, with the repair done after hours if it requires a shutdown.
Property managersA tenant has lost power or lighting and you need a diagnosis, a written quote, and a record of the fix.
Facility-management companiesA local electrician who works to a work order and a not-to-exceed amount and documents the visit.
Building ownersCode-violation corrections and insurance or inspection findings cleared with the paperwork to prove it.
How it runs

Our Process, Step by Step

  1. Call or requestTell us what failed and what it affects; emergencies go to the on-call line.
  2. DiagnoseWe trace the fault with test equipment to the actual cause and make the equipment safe.
  3. QuoteA written fixed price for the permanent repair, approved before additional work begins.
  4. RepairParts staged and shutdowns planned around your hours wherever the failure allows.
  5. Verify & documentWe test the repair, check the rest of the feed, and leave photos and notes for your records.

Code & permits

Like-for-like repairs such as replacing a breaker or a fixture are often maintenance that does not need a permit, while replacing a panelboard, altering a service, or adding circuits does under the Oregon Electrical Specialty Code. We tell you which applies, pull the permit when one is required, and coordinate the inspection and any utility disconnect so the repair is legal as well as working.

Who issues electrical permits in Oregon →

Standby power

If an outage is what brought you here, it is worth asking what should have stayed on. We size and install commercial standby generators and transfer switches for refrigeration, life-safety loads, and operations that cannot go dark.

Commercial standby generators →

Multi-site & facility service

For facility-management companies and multi-site operators, we work to your work order and not-to-exceed amount. If the repair will exceed the NTE, we stop and send a written quote before going further, and each ticket closes with photos and a description of the work performed.

Electrical service for facility managers →
Common questions

Commercial Electrical Repair — Questions We Hear

How fast can you get to a commercial repair call?
Urgent calls are dispatched same-day across the Portland metro, and our on-call electricians answer 24/7 at (971) 471-7897. Non-urgent repairs are typically scheduled within a few business days.
Do you take small commercial repair jobs?
Yes. A single bad ballast, a dead receptacle, a breaker that won't hold — small calls are how most of our long-term commercial relationships started. No job minimums, no runaround.
Can you repair a main panelboard without shutting the business down?
Usually, yes — we plan the shutdown for after hours, stage parts in advance, and have power back before you open. For failures that can't wait, we make the equipment safe immediately and schedule the permanent repair around your operation.
Do you service multi-site retail and property management portfolios?
Yes. We handle repair calls for property managers and multi-site operators under one account — consolidated billing, per-site records, and an electrician who gets to know your buildings.
How do you handle work orders that go over the NTE?
We stop and send a written quote before doing additional work. Nothing beyond the approved not-to-exceed amount is performed without authorization.
Does a commercial electrical repair need a permit?
It depends on the repair. Replacing a failed breaker or fixture in kind is often maintenance; replacing a panelboard, changing a service, or adding circuits requires a permit in Oregon. We confirm before starting and handle the permit and inspection when one is needed.
Do you repair parking lot and exterior lighting?
Yes. Pole lights, wall packs, canopy and sign lighting, photocells, and the underground feeds that serve them. See our commercial lighting repair page for details.

Ready to talk about commercial electrical repair?

Request service online or call — estimates come back fast.