Oregon

Commercial New Construction Electrical Contractor in Portland, Oregon

Ground-up projects reward an electrical contractor who plans ahead. We take new construction from underground conduit and temporary power through rough-in, gear setting, trim, and final inspection, coordinating with your GC and the other trades so the schedule holds.

  • OR CCB #195783 · ELEC C818
  • Licensed, bonded & insured
  • 24/7 emergency response
  • Generac Authorized Dealer
The short answer

Paramount Electric Co. is a new construction electrical contractor in the Portland metro for ground-up commercial, mixed-use, multifamily, and custom residential projects. We bid from plans at a fixed price and carry the full scope: underground and site electrical, temporary power, service and switchgear, rough-in, lighting, low voltage, and final inspection.

From plans to a real number

Send us the drawings and we'll return a complete, itemized electrical bid with clarifications spelled out. We flag missing scope and cost drivers up front, so the number you sign is the number you build to.

Sequenced with the schedule

Underground and site power, temporary service, slab and wall rough-in, service and gear installation, lighting and device trim, low-voltage, and closeout, each mobilized when the building is ready for it and inspected as we go.

Commercial, multifamily, and custom residential

Mixed-use buildings, retail and restaurant shells, warehouses and shops, multifamily and townhomes, and ground-up custom homes with ADUs. Our project managers keep submittals, RFIs, and as-builts moving so closeout is clean.

Service sizing and utility coordination

The service is the long pole on most ground-up projects. We work from the load calculation to confirm the service size and metering arrangement, then coordinate with PGE or Pacific Power on the transformer, the point of delivery, and what the owner's side must provide. Switchgear and meter centers carry real lead times, so we push for early approval and release.

Underground, site, and temporary power

Before the building exists, the electrical work is in the ground: service conduits, site lighting and parking lot circuits, EV-charging raceways, and feeders to outbuildings and signage. We also set the temporary service and distribution that the other trades build from, and remove it at closeout. Larger site scopes are covered on our utility and underground electrical page.

Mixed-use and multifamily

The Roastery by Ava in Tigard is our reference mixed-use project — a ground-up building with commercial space at grade. Mixed-use and multifamily work layers a commercial service, house loads, and tenant or unit metering into one distribution design, with common-area lighting and controls, fire-alarm coordination, and phased occupancy on top.

Care facilities and custom homes

We are building two ground-up residential care facilities in Milwaukie, where life-safety systems, a commercial kitchen, and backup power sit inside a residential-scale building. At the other end, our Wilsonville project was a ground-up custom home with an in-law suite. The process is the same in both: plan review, fixed-price bid, inspected rough-in, and a labeled, documented closeout.

Who it's for

Who We Do This Work For

General contractorsA complete, scope-clear bid and a subcontractor who shows up for underground, rough-in, and trim when the building is ready.
Developers & ownersService sizing and utility coordination started early enough that power is not what holds occupancy.
Multifamily buildersRepeatable unit rough-in, meter banks and house loads, and phased turnover by floor or building.
Custom home buildersA commercial-grade process on a house: clean rough-in, labeled panels, and inspections passed the first time.
How it runs

Our Process, Step by Step

  1. Plan reviewWe review the set, flag missing scope and conflicts, and raise service and utility questions before bid.
  2. BidA fixed price with clarifications and exclusions listed and alternates priced separately.
  3. PreconstructionSubmittals, gear release, utility applications, and temporary power set before the site needs it.
  4. BuildUnderground, slab and wall rough-in, service and gear, trim, and low voltage — each inspected in sequence.
  5. CloseoutFinal inspection, energization, as-builts, typed panel schedules, and O&M documentation.

Code & permits

New buildings are permitted through the local jurisdiction or the Oregon Building Codes Division and built to the Oregon Electrical Specialty Code, with the Oregon energy code governing lighting power and controls. The serving utility — Portland General Electric or Pacific Power for most of our Oregon work — sets its own requirements for the service, metering, and transformer location, and its design and scheduling timeline runs separately from the building permit.

Who issues electrical permits in Oregon →

Prevailing-wage & public work

Publicly funded new construction — schools, public facilities, and affordable housing with public money in it — is typically prevailing-wage work. We perform it regularly and provide certified payroll and the required closeout documents.

Government & public works electrical →

Standby power

If the building needs standby power, put it in the electrical bid. We supply and install standby generators and automatic transfer switches as a Generac Authorized Dealer, so the pad, gas coordination, feeders, and startup are sequenced with the rest of the work.

Commercial standby generators →
Common questions

New Construction Electrical — Questions We Hear

Do you bid from plans?
Yes. Send plans and specs and we'll provide a complete bid with clarifications and exclusions clearly listed.
Can you provide temporary power during construction?
Yes. We set temporary services and distribution for the job site and remove them at closeout.
Do you work with design-build teams?
Yes. For projects without a full electrical design, we develop the design against your budget through our design-build service.
What is included in your new construction electrical bid?
The complete drawn electrical scope at a fixed price, with clarifications and exclusions listed in writing and alternates or add-ons priced separately. Utility fees and other items outside the electrical scope are identified as exclusions so nothing is assumed.
Who coordinates with PGE or Pacific Power?
We do, alongside the owner and GC. We submit the load information, coordinate the service design and meter requirements, and schedule our work around the utility's installation and energization.
Do you take prevailing-wage new construction?
Yes. We perform prevailing-wage and Davis-Bacon projects and provide certified payroll.
How early should the electrical contractor be involved?
Before the service and gear are finalized. Early involvement lets us confirm service size, start the utility process, and release long-lead equipment so the schedule is not waiting on switchgear.

Ready to talk about new construction electrical?

Send plans and a scope for a complete bid, or call to talk through the project.