Oregon

Commercial LED Lighting Retrofit Contractor in Portland, Oregon

An LED retrofit is the rare capital project that pays for itself on a schedule you can put in writing: 50–70% less lighting energy, better light, and incentive money that shrinks the invoice before you ever see it. We audit, model the payback, handle the Energy Trust paperwork, and install around your operation.

  • OR CCB #195783 · ELEC C818
  • Licensed, bonded & insured
  • 24/7 emergency response
  • Generac Authorized Dealer
The short answer

Paramount Electric Co. retrofits warehouses, offices, retail stores, and parking areas to LED across the Portland metro. As an Energy Trust of Oregon Trade Ally, we audit the existing lighting, model the payback, apply for incentives on behalf of qualifying Oregon PGE and Pacific Power customers, and install around your operation.

It starts with an audit, not a quote

We walk the building and count what's actually burning — fixture types, wattages, hours of operation, and the condition of the gear behind them. From that you get a payback model: current cost, post-retrofit cost, incentive dollars, and the month the project goes cash-positive. If the numbers don't work, we'll tell you.

Incentives handled as part of the job

As an Energy Trust of Oregon Trade Ally, we identify qualifying measures during the audit, submit the paperwork, and build the incentive into the project price for qualifying Oregon PGE and Pacific Power customers. On our Tualatin warehouse retrofit, the incentive application was approved in full.

Installed without stopping the operation

High-bay conversions over active racking aisles, office retrofits done after hours, retail floors converted section by section before open. Our warehouse retrofit replaced 180+ fixtures in a 24/5 operation with zero lost shifts — aisle-by-aisle night work coordinated with the facility's own schedule.

Controls are where the second half of the savings lives

Occupancy sensors, high/low dimming, daylight harvesting, and scheduling keep cutting the bill after the fixtures are swapped — and current energy code requires most of them anyway. We specify controls that match how the space is actually used, so they save money without annoying the people working under them.

Is an LED retrofit worth it for a commercial building?

Usually, and the audit tells you for certain. The savings come from three places: LED fixtures draw far less power for the same light, controls turn that light down or off when nobody needs it, and maintenance drops because there are no lamps and ballasts to replace. Buildings with long operating hours see the fastest return. If the numbers for your building don't work, the payback model will show that too, and we'll say so.

Who qualifies for Energy Trust of Oregon lighting incentives?

Energy Trust incentives are available to commercial and industrial customers of Portland General Electric and Pacific Power in Oregon. Eligibility depends on the existing lighting, the replacement equipment, and the program rules in effect when the project is submitted, and incentives generally have to be approved before installation begins. As a Trade Ally we check eligibility during the audit and handle the application. Customers of other utilities are not covered by Energy Trust; we still do the retrofit and will check what your utility offers.

Retrofit kit, new fixture, or redesign?

There are three ways to convert a building. Retrofit kits and LED lamps reuse the existing fixture housing and cost the least. New fixtures replace the whole luminaire one-for-one and reset the equipment's life. A redesign changes the layout, which makes sense when the space has changed since the lighting was installed — racking moved, offices reconfigured, or light levels that were never right. We price the options side by side when more than one is reasonable.

Parking lots and exterior lighting

Exterior lighting runs every night of the year, so it is often the first place a retrofit pays. Pole-top and wall-pack conversions cut the load and largely end the bucket-truck calls for burned-out lamps. If you have poles that are dark right now, start with a repair visit; if the lot is failing fixture by fixture, a conversion is usually the better money.

Retrofit versus repair versus new design

This page covers converting existing lighting to LED. For individual fixtures, poles, or signs that have stopped working, see commercial lighting repair. For lighting design, controls, and new fixtures in a remodel or new building, see lighting and controls.

Who it's for

Who We Do This Work For

Building owners & CFOsA payback model in writing before committing capital.
Facility & operations managersBetter light and fewer lamp and ballast failures, installed without stopping work.
Property managersLower common-area and parking-lot operating costs across a portfolio.
Sustainability leadsDocumented energy savings and incentive paperwork handled by the contractor.
How it runs

Our Process, Step by Step

  1. AuditWe count and log every fixture: type, wattage, hours of operation, and mounting conditions.
  2. Payback modelCurrent cost, post-retrofit cost, estimated incentive, and the project price in one document.
  3. Incentive applicationFor qualifying customers we submit the Energy Trust paperwork before work starts.
  4. InstallPhased by area or shift, with old lamps and ballasts recycled.
  5. CloseoutControls commissioned, final incentive documentation submitted, and warranty information handed over.

Code & permits

Lighting alterations above a threshold trigger the controls requirements of Oregon's commercial energy code, so a retrofit often includes occupancy sensing and daylight response. Fixture replacements generally require an electrical permit, and we handle the permit and inspection.

Who issues electrical permits in Oregon →

Multi-site & facility service

For portfolios, we audit each building to the same standard and deliver one summary across sites, so owners can rank projects by payback and schedule them in order.

Electrical service for facility managers →
Common questions

LED Lighting Retrofit — Questions We Hear

What does an LED retrofit cost, and what's the payback?
It depends on fixture count and hours of operation, which is why we start with an audit and a payback model instead of a per-fixture price. Buildings that run long hours — warehouses, grocery, 24/7 operations — commonly see paybacks of one to three years after incentives.
Are there incentives for LED retrofits in Oregon?
Yes. Energy Trust of Oregon offers cash incentives for qualifying commercial lighting and controls upgrades for PGE and Pacific Power customers, and as a Trade Ally contractor we identify eligible measures and submit the paperwork as part of the project.
Can you retrofit an occupied building without downtime?
Yes — that's the normal case, not the exception. Work is phased after hours or area-by-area, coordinated with your operation. Our 24/5 warehouse retrofit in Tualatin lost zero shifts across 180+ fixtures.
Do you handle disposal of the old fixtures and lamps?
Yes. Fluorescent lamps and ballasts are recycled through proper channels, and that handling is included in the project scope.
Who does commercial LED retrofits in Portland, Oregon?
Paramount Electric Co. does. We are a licensed Oregon electrical contractor and an Energy Trust of Oregon Trade Ally; our Tualatin warehouse project converted 180+ fixtures in a 24/5 operation with zero lost shifts and had its incentive funding approved in full.
Do I have to apply for the Energy Trust incentive myself?
No. For qualifying PGE and Pacific Power customers in Oregon, we identify the eligible measures during the audit and submit the paperwork as part of the project.
Does a retrofit require a permit?
Fixture replacement generally does, and larger projects can trigger energy-code controls requirements. We pull the permit and schedule the inspection.
On the record

LED Lighting Retrofit Work We Can Show You

Ready to talk about led lighting retrofit?

Send plans and a scope for a complete bid, or call to talk through the project.